Niko Home Control 1 Heating/Cooling Driver for ELAN
- Description
- Intrinsic Connected
What does this driver do? This driver allows for the integration and control of Niko Home Control 1 Thermostats from ELAN.
Features:
- Fully two way IP integration of Niko Home Control 1 Heating and Cooling Thermostats
- Auto-discovery of thermostats
- Ability to interface ELAN with Niko Home Control
- Not compatible with Home Control 2
Easy Setup Want the easiest possible setup? Simply add a Remote Support option to your basket and we’ll set everything up for you.
The Intrinsic Difference We pride ourselves in making the best drivers available and so we like to put that little extra into our creations to make us stand out from the crowd.  All of our drivers go through hours of lab testing testing and are extensively field tested in real world environments. In addition, our integration notes are all written by actual installers, making them much more meaningful.  Our drivers are backed up with the most comprehensive support in the industry.
Support If it’s your first time installing this driver or if you think there’s a technical problem, all of our drivers are fully supported through Online Support System
Feedback Every driver is made by us in house in the UK. If you have any suggestions on new features or changes you would like to see in our driver, then please let us know.
Licence Only one licence is need per controller and can run as many devices as required up to the limit supported by the platform.
The Intrinsic difference
Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.
Support
All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.
Enhanced support
We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.
License
All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.
Easy setup
All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.
Feedback
If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.
Trackback URL https://www.intrinsicdev.com/downloads/elan-g-niko-home-control-heatingcooling-driver-v-2/trackback/
Comments are closed