Top rated support
Top rated support
Instant download
Instant download
Secure payment via Stripe
Secure payment via Stripe
April 23, 2021

Shelly Energy Monitoring Driver for ELAN

What does this driver do?

This official Shelly Energy Monitoring Driver allows an Elan system to communicate with a Shelly EM Device via Ethernet for energy monitoring.

Shelly energy monitoring devices offer a great value option for adding energy monitoring features to Elan. They allow you to monitor the status and history, as well as the current and past electrical power consumption for the day, week, month or year. You can also monitor how much solar is being produced or check the power consumption of individual devices.

Features:

The driver can monitor and display the following info:

  • Wattage: Current usage in watts available as text feedback and bar gauge
  • Voltage: Current voltage (not supported on all shelly devices) available as text feedback and bar gauge
  • Total Consumption Counter: A kWh counter for current usage, resettable on certain devices.
  • Cost: The driver can take a cost per kWh figure and display a total cost for the current usage.
  • Timestamp for last check-in as a text field
  • Intrinsic Platinum Integration – Official Shelly driver
  • Driver uses Intrinsic(Athena) technology for key free licensing, update alerts and enhanced support

Current version number: 23.11.6

Our Shelly Energy Monitoring Driver for ELAN is compatible with:

All Shelly energy monitoring devices, including:

  • Shelly EM
  • Shelly EM3
  • Shelly 1PM
  • Shelly Dimmer2

The Intrinsic difference

Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.

Support

All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.

Enhanced support

We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.

License

All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.

Easy setup

All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.

Feedback

If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.

Trackback URL https://www.intrinsicdev.com/downloads/shelly-energy-monitoring-driver-for-elan/trackback/

Comments are closed