Top rated support
Top rated support
Instant download
Instant download
Secure payment via Stripe
Secure payment via Stripe
May 3, 2021

Shelly Humidity & Temperature Driver for ELAN

What does this driver do?

This Shelly Humidity & Temperature Driver allows an Elan system to communicate with a Shelly H&T or other compatible Shelly device via Ethernet for monitoring and thermostat function.

Shelly H&T helps with monitoring changes in humidity and temperature while avoiding dryness and conditions for mould growth, as well as ensuring comfortable conditions in your home. The sensor can be placed anywhere in your home.


  • Humidity: Current humidity reading (available as text feedback and bar gauge)
  • Thermostat: The device will present the temperature reading to ELAN as a Thermostat device
  • Battery: Current device battery level (available as text feedback and bar gauge)
  • Intrinsic Platinum Integration – Official Shelly driver
  • Driver uses Intrinsic(Athena) technology for key free licensing, update alerts and enhanced support
  • View the complete Shelly range here

Known Issues:

As of 8.6 we have found that the custom event map triggers for Battery Low and Humidity Level trigger are non-functional. This has been reported to ELAN and confirmed as a bug.

Current version number: 21.5.2

Our Shelly Humidity & Temperature Driver for ELAN is compatible with:

  • Shelly H&T
  • Shelly 1/1PM with Temperature Probe add-on (no battery or humidity readings with this option)

The Intrinsic difference

Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.


All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.

Enhanced support

We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.


All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.

Easy setup

All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.


If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.

Trackback URL

Comments are closed