Top rated support
Top rated support
Instant download
Instant download
Secure payment via Stripe
Secure payment via Stripe
July 11, 2023

Shelly Lighting & Shades Driver Suite for RTI

What does this driver suite do?

This RTI Shelly Driver Suite allows an RTI system to communicate with a Shelly lighting system via ethernet for advanced lighting, shades and plug control.


  • Supports both original (v1) Shelly devices and newer (v2) Shelly Plus and Pro models
  • (New January 2024) Added support for new Gen 3 devices and MINI range
  • (New April 2024) Added support for  Shelly Pro Dimmer 1PM / 2PM for PlusLighting driver
  • Auto Discovery: The driver will identify all Shelly devices on your network
  • Switch & Dimming: Where supported this driver allows for switch and dimming control.
  • Plugs/Sockets: On/off and status feedback
  • Shade & Shutter: Open, close and stop with status feedback. When a Shelly 2.5 is in shutter mode the driver will discover and add it as a single shade device.
  • RGB & Kelvin: On, off, brightness, hue, saturation, and value available for control and feedback with optional sliders interface
  • (New Jan 2024) Gen2 PlusPro Driver now supports up to 32 Shelly devices offering control of up to 128 lights
  • Intrinsic Platinum Integration – Official Shelly driver
  • Driver uses Intrinsic(Athena) technology for key free licensing, update alerts and enhanced support

Current version number: 240416.00 (Gen 1) and 240416.00 (Gen 2/3)

Our Shelly Lighting & Shades Driver Suite for RTI is compatible with:

  • Shelly 1
  • Shelly 1L
  • Shelly 2
  • Shelly 2.5
  • Shelly 4
  • Shelly Dimmer 2
  • Shelly Duo
  • Shelly Bulb
  • Shelly Vintage
  • Shelly RGBW2
  • Shelly Plug
  • Shelly Plus S
  • Shelly Plug US
  • Shelly Plus editions
  • Shelly Pro editions
  • Shelly 1 Mini
  • Shelly 1 PM Mini
  • Shelly 0-10v Dimmer
  • Shelly Pro EM 50 (Internal Relay)
  • Shelly Pro 3 EM (Addon Relay if present)
  • Shelly Pro Dual Cover (Shades)
  • Shelly Pro Dimmer 1PM / 2PM

The Intrinsic difference

Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.


All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.

Enhanced support

We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.


All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.

Easy setup

All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.


If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.

Trackback URL

Comments are closed