Top rated support
Top rated support
Instant download
Instant download
Secure payment via Stripe
Secure payment via Stripe
June 2, 2023

Barco Residential (Pulse) Projector Module for Crestron

What does this module do?

This Crestron Barco Module allows a Crestron system to communicate with a Barco Residential Projector for display control.

Features:

  • Supported commands include:
    • Power on/off
    • Wake on LAN (where supported)
    • Go to Eco Mode
    • Select input
    • Recall preset
    • RealColor mode
    • HDR screen luminance
    • Scaling
    • Warp engine
    • 4 corner wrap
    • Bow correction
    • JSoN command input
  • The following feedback is available:
    • Article number
    • MAC address
    • Current power state
    • Eco mode
    • Input selection
    • Environmental feedback (inlet temperature, humidity, air pressure and mains voltage)
    • Shutter feedback
    • Input feedback (vertical resolution, vertical frequency, color primaries, color space, mastering luminance and content aspect ratio)
  • Intrinsic Platinum Integration – Official Barco commissioned driver
  • Driver uses Intrinsic(Athena) technology for key free licensing and enhanced support
  • Please note – requires an active internet connection

Current version number: 240302

Our Barco Residential (Pulse) Projector Module for Crestron is compatible with:

  • Medea
  • Bragi
  • Balder
  • Loki
  • Hodr
  • Njord
  • Above includes CS variants
  • Please note some features vary by model (see Integration Note for full details)

The Intrinsic difference

Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.

Support

All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.

Enhanced support

We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.

License

All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.

Easy setup

All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.

Feedback

If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.

Trackback URL https://www.intrinsicdev.com/downloads/barco-residential-pulse-projector-module-for-crestron/trackback/

Comments are closed