Top rated support
Top rated support
Instant download
Instant download
Secure payment via Stripe
Secure payment via Stripe
January 29, 2024

Just Video Walls M Series Driver for Control4

What does this driver do?

This Just Video Walls Driver allows a Control4 system to communicate with supported Just Video Walls M-Series screens via IP for display control.

Please Note – Firmware version 1.4 or higher is required for the Just Video Walls device for the driver to function correctly.

Features:

  • Power Control
  • Source Switching
  • Preset Recall
  • Brightness
  • Intrinsic Platinum Integration – Official Just Video Walls commissioned driver. Speak to your JVW rep to receive a free promo code for this driver

Current version number: 241102

Our Just Video Walls M Series Driver for Control4 is compatible with:

  • Just Video Walls M Series running firmware 1.4 and above

The Intrinsic difference

Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.

Support

All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.

Enhanced support

We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.

License

All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.

Easy setup

All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.

Feedback

If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.

Trackback URL https://www.intrinsicdev.com/downloads/just-video-walls-m-series-driver-for-control4/trackback/

Comments are closed