Top rated support
Top rated support
Instant download
Instant download
Secure payment via Stripe
Secure payment via Stripe
November 18, 2022

Wattbox 150/250/800 Series PDU Driver for Control4

What does this driver do?

This Control4 Wattbox 150/250/800 Series Driver allows a Control4 system to communicate with a WattBox 150/250/800 power device to control switching and energy monitoring feedback.

Features:

  • Relay control: All controllable outlets can be controlled from the driver
  • Programming: All controllable outlets can be switched on, toggled and restarted (off/5 secs/on) via the programming interface.
  • Energy Monitoring Feedback, where available, is parsed by the driver and stored in variables in Control4
  • Intrinsic Advanced Integration – Official WattBox public API driver
  • Driver uses Intrinsic(Athena) technology for key free licensing, update alerts and enhanced support

Current version number: 221102

Our Wattbox 800 Series PDU Driver for Control4 is compatible with:

  • Wattbox 800 series
  • Please note this driver hasn’t been tested on UPS devices
  • Wattbox 150/250 – energy monitoring feedback not available

The Intrinsic difference

Our drivers are all developed in-house, in the UK so you can be sure of the highest reliability and responsiveness when updates are required. We never use open source code or code libraries. All of our drivers are thoroughly tested in-house as well as externally through our Beta Programme before being offered on our website.

Support

All of our drivers/modules are supported free of charge through our Online Support system. We offer comprehensive support for all of our software that requires the purchase of a license key for as long as they are listed on the Intrinsic Dev website. If it’s your first time installing a driver or if you believe there is a technical problem simply submit a ticket via our Online Support system.

Enhanced support

We also offer Enhanced Remote Support for each control platform. This support is charged in 30 minute intervals where we are pleased to advise on anything that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming, general training and system design.

License

All of our software is available to download free of charge but will require licensing to function. Unless specifically noted only one license is required per controller/processor. You can run as many devices as required up to the limit supported by your chosen control platform.

Easy setup

All of our drivers/modules come with comprehensive Integration Notes to ensure the easiest possible set up of our software. Many also have Installation Tutorial videos to further assist you. Please ensure you refer to these resources each time you install a new driver/module.

Feedback

If you have any suggestions on new features or changes you would like to see to a driver/module then please let us know via our Online Support system.

Trackback URL https://www.intrinsicdev.com/downloads/wattbox-800-series-pdu-driver-for-control4/trackback/

Comments are closed